ARDEX Hydrepoxy WPM 300 Pond Sealer Kit – Black – 4L

Ardex Hydro-Epoxy WPM 300 Pond Sealer Kit – 4L Two-Part Epoxy Membrane for Ponds & Water Features

Ardex Hydro-Epoxy WPM 300 Pond Sealer is a two-part, water-based epoxy membrane for repairing leaks and sealing ponds and water features. One 4L kit will cover 12m².

Fish safe and compliant to AS/NZS4020 for potable drinking water, this epoxy membrane offers excellent adhesion over most substrates, including damp surfaces and green concrete.

Features & Benefits

• Water resistant, prevents rising damp and efflorescence, and withstands hydrostatic pressure
• Excellent adhesion over most substrates, including damp surfaces and green concrete
• Fish safe
• Compliant to AS/NZS4020 for potable drinking water
• One 4L kit covers 12m²

Recommended For

• Repairing leaks in ponds and water features
• Sealing new ponds and water features

Surface Preparation

• Ensure your painting surface is clean, smooth and free from loose debris
• Combine the two components in a 1:1 ratio and mix thoroughly 
• Only mix as much as you can use, as you cannot store this blend once it has been mixed. 
• On dry or highly porous surfaces, spray a fine mist of water over the surface before application, and remove any free-standing water first
• Apply by roller, brush or squeegee – working the material into the prepared surface to achieve the required coverage
• Allow to dry for at least 24 hours before applying a second coat.
• Once you have applied at least 2 coats, rinse the paint down once to wash away any residue (important if used on a pond housing fish) before filling.